logo
ভালো দাম  অনলাইন

পণ্যের বিবরণ

25Gb/s Duplex LC 10km SFP28 Transceiver

ব্র্যান্ড নাম: Seacent
মডেল নম্বর: 25Gb/S অপটিক্যাল ট্রান্সসিভার মডিউল
MOQ: 10 পিসি
মূল্য: USD
অর্থ প্রদানের শর্তাবলী: এল/সি, টি/টি, ওয়েস্টার্ন ইউনিয়ন
সরবরাহের ক্ষমতা: 10000PCS
বিস্তারিত তথ্য
উৎপত্তি স্থল:
শেনজেন চীন
সাক্ষ্যদান:
CE FCC RoHS
যোগানের ক্ষমতা:
10000PCS
পণ্যের বর্ণনা
25Gb/s Duplex LC 10km SFP28 Transceiver
Features
  • Up to 25.78Gb/s Bidirectional data links
  • CWDM-DFB Laser transmitter
  • Link length of 10km on Single Mode Fiber (SMF)
  • SFP28 Transceiver / hot-pluggable SFP28 footprint
  • Duplex LC receptacles
  • Single 3.3V power supply
  • Power dissipation (W) < 1.5W
  • RoHS-6 compliant and lead-free
  • Built-in digital diagnostic functions
Applications
  • 25GBASE-LR 25G Ethernet
  • 25G/eCPRI, 3G, 4G, 5G
Description
Seaccent Photonics SP-CS-5XX10 transceivers are Enhanced Small Form Factor Pluggable SFP28 transceivers designed for use in 25-Gigabit multi-rate links up to 10km of G.652 single mode fiber. They are compliant with SFF-8431, SFF-8432, SFF-8472 and IEEE 802.3cc; support 4x, 8x and 10x FibreChannel. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. Seaccent Photonics SP-CS-5XX10 transceivers are RoHS compliant per Directive 2011/65/EU. The high performance cooled 1271~1371nm CWDM DFB transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications at 10km links. Designed with a metal enclosure, low EMI performance, bail latch, and connector latch.
Absolute Maximum Ratings
Parameter Symbol Min. Typical Max. Unit
Storage Temperature Ts -40
85 °C
Supply Voltage Vcc -0.5
4 V
Relative Humidity RH 0
85 %
Operation Temperature Ts 0
70 °C
Electrical Characteristics (Top = Tc, VCC = 3.135 to 3.465 Volts)
Parameter Symbol Min. Typical Max. Unit Note
Supply Voltage Vcc 3.135
3.465 V
Supply Current Icc

350 mA
Power Consumption P

1.5 W
Transmitter Section
Input differential impedance Rin
100
Ω 1
Differential Input Voltage Swing (mV) Vinpp 180
700 mV 2
Transmit Disable Voltage VD 2
Vcc V 3
Transmit Enable Voltage VEN Vee
Vee+0.8 V
Receiver Section
Rx Output Diff Voltage Vo 300
850 mV 3
LOS Fault Vlosfault 2
Vcc_host V 5
LOS Normal Vlos norm Vee
Vee+0.8 V 5
Notes
1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.
2. Into 100Ω differential termination.
3. LOS is an open collector output. Should be pulled up with 4.7kΩ - 10kΩ on the host board. Normal operation is logic 0; loss of signal is logic 1. Maximum pull-up voltage is 5.5V.
Mechanical Dimensions
25Gb/s Duplex LC 10km SFP28 Transceiver 0
Frequently Asked Questions
Q: Are you trading company or manufacturer?
A: We are original manufacturer. We can do OEM/ODM business. Our company mainly produces optical fiber products.
Q: How long is your delivery time?
A: Group buying delivery time: 30-60 days; General delivery time: 20 days.
Q: What is your terms of payment?
A: Please contact our sales team for payment terms and conditions.
ভালো দাম  অনলাইন

পণ্যের বিবরণ

বাড়ি > পণ্য >
অপটিক্যাল ট্রান্সসিভার মডিউল
>
25Gb/s Duplex LC 10km SFP28 Transceiver

25Gb/s Duplex LC 10km SFP28 Transceiver

ব্র্যান্ড নাম: Seacent
মডেল নম্বর: 25Gb/S অপটিক্যাল ট্রান্সসিভার মডিউল
MOQ: 10 পিসি
মূল্য: USD
প্যাকেজিং বিবরণ: ইলেক্ট্রোস্ট্যাটিক ব্যাগ ভ্যাকুয়াম প্যাকেজিং
অর্থ প্রদানের শর্তাবলী: এল/সি, টি/টি, ওয়েস্টার্ন ইউনিয়ন
বিস্তারিত তথ্য
উৎপত্তি স্থল:
শেনজেন চীন
পরিচিতিমুলক নাম:
Seacent
সাক্ষ্যদান:
CE FCC RoHS
মডেল নম্বার:
25Gb/S অপটিক্যাল ট্রান্সসিভার মডিউল
ন্যূনতম চাহিদার পরিমাণ:
10 পিসি
মূল্য:
USD
প্যাকেজিং বিবরণ:
ইলেক্ট্রোস্ট্যাটিক ব্যাগ ভ্যাকুয়াম প্যাকেজিং
পরিশোধের শর্ত:
এল/সি, টি/টি, ওয়েস্টার্ন ইউনিয়ন
যোগানের ক্ষমতা:
10000PCS
পণ্যের বর্ণনা
25Gb/s Duplex LC 10km SFP28 Transceiver
Features
  • Up to 25.78Gb/s Bidirectional data links
  • CWDM-DFB Laser transmitter
  • Link length of 10km on Single Mode Fiber (SMF)
  • SFP28 Transceiver / hot-pluggable SFP28 footprint
  • Duplex LC receptacles
  • Single 3.3V power supply
  • Power dissipation (W) < 1.5W
  • RoHS-6 compliant and lead-free
  • Built-in digital diagnostic functions
Applications
  • 25GBASE-LR 25G Ethernet
  • 25G/eCPRI, 3G, 4G, 5G
Description
Seaccent Photonics SP-CS-5XX10 transceivers are Enhanced Small Form Factor Pluggable SFP28 transceivers designed for use in 25-Gigabit multi-rate links up to 10km of G.652 single mode fiber. They are compliant with SFF-8431, SFF-8432, SFF-8472 and IEEE 802.3cc; support 4x, 8x and 10x FibreChannel. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. Seaccent Photonics SP-CS-5XX10 transceivers are RoHS compliant per Directive 2011/65/EU. The high performance cooled 1271~1371nm CWDM DFB transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications at 10km links. Designed with a metal enclosure, low EMI performance, bail latch, and connector latch.
Absolute Maximum Ratings
Parameter Symbol Min. Typical Max. Unit
Storage Temperature Ts -40
85 °C
Supply Voltage Vcc -0.5
4 V
Relative Humidity RH 0
85 %
Operation Temperature Ts 0
70 °C
Electrical Characteristics (Top = Tc, VCC = 3.135 to 3.465 Volts)
Parameter Symbol Min. Typical Max. Unit Note
Supply Voltage Vcc 3.135
3.465 V
Supply Current Icc

350 mA
Power Consumption P

1.5 W
Transmitter Section
Input differential impedance Rin
100
Ω 1
Differential Input Voltage Swing (mV) Vinpp 180
700 mV 2
Transmit Disable Voltage VD 2
Vcc V 3
Transmit Enable Voltage VEN Vee
Vee+0.8 V
Receiver Section
Rx Output Diff Voltage Vo 300
850 mV 3
LOS Fault Vlosfault 2
Vcc_host V 5
LOS Normal Vlos norm Vee
Vee+0.8 V 5
Notes
1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.
2. Into 100Ω differential termination.
3. LOS is an open collector output. Should be pulled up with 4.7kΩ - 10kΩ on the host board. Normal operation is logic 0; loss of signal is logic 1. Maximum pull-up voltage is 5.5V.
Mechanical Dimensions
25Gb/s Duplex LC 10km SFP28 Transceiver 0
Frequently Asked Questions
Q: Are you trading company or manufacturer?
A: We are original manufacturer. We can do OEM/ODM business. Our company mainly produces optical fiber products.
Q: How long is your delivery time?
A: Group buying delivery time: 30-60 days; General delivery time: 20 days.
Q: What is your terms of payment?
A: Please contact our sales team for payment terms and conditions.